フ@Strix859
フ@Strix859
フ@Strix859
GYe
GWhat case you using?
フI'm not really having issues with high temps
フBut I have 2 really pretty rgb fans
フSo want to use them
フI show you
フ
フGreen = Fan
フBlue = In take
フRed = Exhaust
フIt's this right now
フWhere do I put the other 2 fans
GUhh dunno where the fan mounts are…
Gyou could replace the top and bottom front fans
G^^^
フI taped the other fans so it doesn't matter
フThey're already rgb
Gare they all rgb?
フYesss
フExcept the GPU fans
フAnd the power supply fan
Gthen you can pretty much mount them anywhere with screw holes
フLook @pls hire me
フI came up with more ideas
Gi really don't recommend using tape for a number of reasons
フ
フBut having 2 exhausts next to each other
フFeels very wrong
GUhh remember heat rises
GYour top fans should be exhaust in this case
Gno for computer air flow it really doesn't matter direction
フ@Strix859
Gand if you put exhaust on the front fan you wouldn't be cooling anything, you'd just be cycling air in and then blowing it straight out
Gthough i guess there is the ram there...
GO? It doesnt?
フLook at this 3rd draft @pls hire me
Gyea because of the volumes of air you're working with it really doesn't make a difference
フ5 in takes and 1 exhaust in the back
GAh Fair enough
Gno, that back exhaust is going to be working triple time
Gtypically you should balance the number of exhaust and intake to around ±2 difference
Solution
Gdraft 2 is better
Ashit I just did 3 intake on the front side, 1 exhaust at the back, and the rad with 3 fans exhaust on the top :shrug:
フCan you plss make it better
フThat's gooddd
Gnah draft 2 is fine